800.242.2443 info@nevers.com

Manufacturing Lead Times

Lead Times are Provided as General Estimates Only. Please Confirm Lead Times With Nevers.

Updated 10-19-21

NOTE: Lead times are measured from the date of approved, signed drawings and receipt of the project deposit. Some materials for “Modified” or “Custom” tables may have long or variable lead times (stone, inset logos. AV equipment, etc.).

DISCLAIMER: The time shown above is a general estimate for planning and not a guarantee of completion. Nevers is not responsible for delays caused by approval chains, order entry complexity, stain-to-match time required, or vendor supply chain stability.

NEVERS PRODUCTS:

  • AMERICANA
  • EKTA*
  • INTERCONNECT
  • LEEZA*
  • RIO  MADERA*
  • SYMPOSIA

*Metal Bases/Hardware
May Affect Lead Times

 

NOTE: Products below are currently
requiring “Modified” lead times:

  • EVENTI/DUE
  • STAENDE
  • TEMPEZO

NEVERS PRODUCTS:

  • AMERICANA
  • CAZZADOR
  • EVENTI/DUE
  • EKTA*
  • INTERCONNECT
  • LEEZA*
  • RIO  MADERA*
  • STAENDE
  • SYMPOSIA
  • TEMPEZO
  • Credenzas
  • Lecterns

*Metal Bases/Hardware
May Affect Lead Times

NEVERS PRODUCTS:

  • AMERICANA
  • CAZZADOR
  • EVENTI/DUE
  • EKTA*
  • INTERCONNECT
  • LEEZA*
  • RIO  MADERA*
  • STAENDE
  • SYMPOSIA
  • TEMPEZO
  • Credenzas
  • Lecterns
  • Auditoriums
  • Reception Stations
  • Private Offices

*Metal Bases/Hardware
May Affect Lead Times

NEVERS FAQs

Is Nevers on GSA?

Yes, Nevers GSA Contract Number is GS-27F007DA and GS-27F008DA.

What are the Nevers FREIGHT TERMS?

 

Freight is included on orders over $2,000 Net. All orders UNDER $2,000 NET are subject to a minimum order/additional freight charge of $275 NET.

Is there a FUEL SURCHARGE?

No, currently we do not charge a fuel surcharge fee.

Is there an upcharge for a CUSTOM FINISH?

 

Any order UNDER $5000 LIST will be subject to a 15% upcharge.

What is the process for a CUSTOM FINISH?

A finish sample or stain sample typically takes about 3 to 5 days to prepare. A Finish Sample (Control Sample) is required from the customer before the process of matching approval can begin. A custom matched stain sample will be provided. If the color match meets approval, the approval form needs to be signed, dated and returned to Nevers.

What are the STANDARD LAMINATES?

 

Any Wilsonart® laminates ending with finish codes (-60) or (-38) are standard. Most Wilsonart® laminates are available in multiple finishes. To find out if the laminate selected is available in finish codes (-60) or (-38) please contact customer service. View our standard laminate design offerings here.

Can I specify NON-STANDARD LAMINATES?

 

Certainly! Any commercially available laminate may be specified. Non standard laminate is subject to a minimum upcharge of 15% per order per color. Call Customer Service to confirm pricing.

What is Nevers WARRANTY?

Nevers Industries, Inc. warrants its products to be free from defects in material and workmanship under normal and reasonable use and service for a period of ten years from the date of shipment to customer. Proprietary supporting products, which are manufactured by others and sold by Nevers Industries, Inc. carry the original manufacturer’s warranty. The decision of defects in workmanship or materials or the decision of misuse or abuse remains with Nevers Industries, Inc. No warranties other than those contained herein will be implied and Nevers Industries, Inc. does not authorize any person to create any warranties other than those contained herein.

Nevers Industries, Inc. | 6845 Wedgwood Court N | Maple Grove, MN 55311 | Tel: 800.242.2443 | Email: info@nevers.com