Care & Cleaning
Keep your Nevers products at their best with the right care. See the recommendations below or download the pdf here.
How to Protect Nevers Furniture
Proper Maintenance preserves our quality finishes.
- Use Coasters and Desk pads: This will protect the finish against damage from jewelry, ballpoint pens, spills and moisture, and direct heat.
- Use Felt Pads and on the bottom of Equipment and Electronics: The compounds in rubber and vinyl pads often supplied on office equipment can damage wood finishes.
- Lift instead of sliding objects: Sliding objects across the surface can scratch all furniture finishes.
- Periodically move accessories around on surfaces to prevent inconsistent aging: Wood species and finishes will change and age with exposure to light. Periodic movement of objects on or against the furniture will help ensure even aging.
- Avoid Direct Sunlight: If possible to preserve the furniture’s original beauty.
- For Best Performance: Maintain temperatures between 60 and 80 degrees Fahrenheit and humidity levels between 30 and 50 percent.
Cleaning Fine Wood Furniture
- Accidental Spills: Spilled liquids should be wiped up immediately with a soft, absorbent cloth.
- Periodic Dusting: Clean with a slightly damp cloth, using a clean microfiber cloth to dry. Always wipe in the direction of the wood grain.
- Regularly/Monthly Cleaning: Lightly soiled areas may be cleaned with Windex, following the cleaner’s directions. Surfaces should be cleaned with a soft cloth, wiping in same direction as the wood grain and dried with a soft cloth.
- Polishing Wood Furniture: We do not recommend the use of commercial wax or polish which may leave undesirable residues. If polishing is desired, use a polish that is silicone free such as FinishWorks Wood Polish.
- IMPORTANT: Abrasive cleaners as well as oil and silicon products should never be used on wood furniture.
Cleaning Laminate Surfaces
- Periodic Dusting: Clean with slightly damp soft cloth, using another soft cloth to polish dry.
- Regularly/Monthly Cleaning: Lightly soiled areas may be cleaned with a soft cloth and mild liquid detergent. For stubborn stains, use a non-abrasive ammonia based household cleanser, being sure not to get any cleanser on any wood or wood trim. Oil, ammonia and silicon products should never be used on wood or wood trim surfaces.
- Polishing Laminate Furniture: We do not recommend the use of commercial wax or polish which may leave undesirable residues and possible streaking. If polishing is desired, use a laminate polish being careful not to get any polish on any attached wood trim. Oil, ammonia and silicon products should never be used on wood or wood trim surfaces .
- Cleaning Metal and Painting Metal Surfaces: Regular/Monthly Cleaning Lightly soiled areas may be cleaned with a soft cloth and a mild detergent.
Cleaning Cambria Surfaces
- For Cambria product care, please visit the Cambria Quartz Product Care found externally here →
